There are two methods to resetting a Kenwood touch screen radio
All of the technological devices tend to have their bad days when they somehow stop working. There are a few things that may cause this to happen, and one of the most common reasons is the overheating of the device.
If your Kenwood touch screen radio has stopped working the way it is supposed to, out of the blue, you can easily perform one of the two resets to fix it, and get it up working properly again.
In this article, we will be showing you both ways of how to reset your Kenwood touch screen radio by using a simple method that will take only a couple of minutes from your time.
Steps to successfully resetting your Kenwood touch screen radio
You should know that these steps below will only work on radios that are DDX touchscreen ones. You will not be able to follow along with these steps if you have a Kenwood car radio that does not have a touch screen.
So, before we start, we would like to say that there are two versions resetting for Kenwood touch screen radios. The first version is a, so called, soft reset, and the other version is the factory reset.
You should know that the soft reset is the same as a restart button on your phone, for example. And that the factory reset will bring your Kenwood touch screen radio to its first, factory settings. In this article, we will be explaining to you both ways on how to reset the Kenwood touch screen radio. Let’s begin now.
How to do a soft reset of the Kenwood touch screen radio
As we have already mentioned, if your Kenwood touch screen radio starts crashing, you should always try to do this type of reset first. If you do a factory reset instantly, you will have to set up your whole radio once again. It is advised to try this method first, as it is highly successful.
- The first thing that you will need to do is to give some power to your Kenwood touch screen radio. Simply turn on your car to give the power contact to the radio. As soon as you see that the side buttons on your Kenwood radio have light up, you can proceed to the second step.
- And now, you will need to take some kind of a sharp object, such as a screwdriver or a toothpick. You will need to look for a small triangle red lighted up button. This button should probably be located in the top left corner of your radio.
- Use the sharp object to press that button, and hold it for a maximum of five seconds.
If your screen turns white, or black, it means that the reset has worked, or started. You should wait for a while until the reset has been finished. After that, try to use your radio regularly. If the radio is still not working the way it is supposed to, then you should definitely try the second method and do the factory reset. Proceed to the next section to learn how to do a factory reset on your Kenwood touch screen radio.
How to do a factory reset of the Kenwood touch screen radio
Bringing your Kenwood touch screen radio back to the factory rest settings is just as easy as the first method.
- Your car also must be turned on while doing this process, so that the radio has the power supply it needs.
- After turning on your radio, you should find the Eject CD button. This button should be located on the left side of the CD slot. Also, locate the Volume button. You will need to press and hold both of these buttons at the same time.
- For this factory reset process, you will also need a sharp, pointy object next to you. Find the small triangular red reset button and while holding the Eject CD button and the volume button, use a sharp object to also press that triangular one.
- You will have to hold the Eject CD and the volume button until your radio boots back up. As soon as your radio is on, you can let go of those buttons.
- When the radio is on, you will be able to click on the Initialize all button on your screen.
- After that command has been accepted, use that pointy tool again to press the triangular reset button once again.
This is pretty much it, after this, you will be taken to the factory settings where you can easily change them to your liking.
Why is it important for you to learn how to reset your Kenwood touch screen radio
Learning what to do in case your Kenwood radio crashes is super important. All of us know how much of a headache it is when some device stops working for no reason when you need it the most. And, by learning what to do in that situation will for sure save you from all of the stress.
This is the easiest and the most effective way to solve the Kenwood touch screen radio crushing. The important thing is to stay calm when this happens and not to panic. People usually assume that they have somehow caused the radio to break, but that is rarely the case. Like any other technology Kenwood touch screen radios also have the right to crash sometimes.
This is for sure one of the easiest processes that everyone can do if they follow our above instructions carefully. And, if by chance, your radio still does not work even after you have tried resetting it in both ways, try once again, just in case. And, if that too does not work, consider taking your car to the professionals, as they will be the ones that will determine and fix your issue.
Conclusion
As we have already mentioned, we prefer the first method of resetting, but, if you want to go straight to the second one, you are able to. The second method will work ninety percent of the time, and will give you the willing results. The only bad thing is that you will have to set up the whole radio again, and that can take a while.
We really hope that we have helped you solve your issue, and that you managed to learn something new from our how to reset a Kenwood touch screen radio today. Stay tuned for next articles!
FAQ
1. If the touchscreen on my Kenwood radio has completely stopped working, can I still try to reset it?
Yes, the touch screen has stopped working issue is one of the most common things that happen when the Kenwood touch screen radio crashes or overheats. You can definitely try the soft reset first, and, if that does not give you any kind of results, consider doing the factory reset next. But, have in mind that by performing a factory reset, the data from your radio will be erased, and you will have to set it up again.