How to prop up a TV without a stand

Televisions are now very often hung on the wall. So that they do not interfere, for them you do not need to specially put bedside tables or racks. These devices can be fixed using a bracket. But this is not the only way. In some cases, they do without such a unit. Why buy an expensive design if you can do it yourself? Find out how to hang your TV on the wall without buying bulky frames, which monitor is made for it, and how to hide the wires so that everything is tidy.

For convenience, TVs are often hung on the wall.

In this case, it is necessary to take into account the weight of the screen, the place where it will be located, and the material on which it must be fixed. Not all screens can be installed this way. Massive products still need some kind of “foundation”.

interiors, it is quite common to find TV panels hanging on the wall. This method allows, on the one hand, to save space in the room, on the other, to decorate an empty wall. In this case, you can save on the purchase of one or more paintings for your decoration.

What kind of TV can I hang without a stand?

Before you can hang your TV on the wall without a stand, you need to figure out which monitors, in principle, can be mounted without a proper “stand”. If your technique does not meet the requirements listed below, it is better not to risk it and buy a suitable frame. Then there will be no question about whether the screen is held securely, whether the wires are bent or whether it is too close to the wall.

Here are the characteristics of screens that can be repaired without supports:

  • Only “flat” TVs are suitable – liquid crystal (LCD or LED), and plasma (Plazma). CRT (“pot-bellied”) monitors cannot be installed this way – they need a frame with a shelf.
  • All connectors and cords should be located on the sides of the device or in the front. If they are on the rear panel, then after installing the equipment, nothing can be connected to them.
  • To decide how to mount a TV to a wall, you need to look at what it’s made of. Do not bolt a massive unit to a flimsy base. Unfortunately, it is impossible to immediately determine the weight supported by the material. But if you see that the wall is unreliable, it is better not to risk it.
  • The monitor case should have bolt slots.
  • It is recommended that the display documentation indicates that it can be suspended. Some models are designed to rest on a solid, level base. And when working “in the air”, they can malfunction.
  • It is best not to mount large screens without support. The instructions for the frame always state how much weight it can support. And craft units cannot achieve such precision. If a small TV comes out to hang without a problem, a huge one can fall, breaking the bracket and tearing the wires.

How to choose a location for your TV?

A fixed monitor will no longer be able to move or tilt anywhere. Therefore, you need to choose a place where it will be most convenient for you to watch movies. The screen should be positioned at a certain distance from your eyes. It depends on the size of the screen and the type of image the TV broadcasts (analog format, digital format, FullHD). If you are wondering how to hang a TV on the wall, first find out its diagonal.

To enjoy television programs on a 32-inch screen, it must be positioned about two meters from the hypothetical viewer. For a 50-inch screen, this distance is already three meters.

However, to a greater extent, you should be guided by your feelings. Sit where you plan to watch a movie. Imagine that you have a television in front of you. It must be flush with the eyes. So you don’t have to tilt your head.

In addition to subjective editing, there are also objective aspects.

  • The TV should not be installed where electrical wires pass. It is better to know in advance where they are, so as not to accidentally run into them when drilling. There are special devices for this: metal detectors, indicators and signaling devices.
  • If you decide to “hide” the screen in a deep niche, between wall panels or in a closet, then abandon this idea. The device will overheat.
  • Hang the monitor in an open area. You should not “pinch” it between the shelves. It is not necessary to mount it on a completely empty wall. But there must be some sort of gap.
  • Install the product on high-quality, durable walls that won’t crumble, crumble, or rot. So that the screwed self-tapping screw does not fall out after a while.
  • It is best to mount the display near a power outlet. This will make it easier to hide the wires.

Which TV is Right for You?

The quality of cheap mounts can be very questionable, and the abundance of hinges does not add to their reliability. And the metal itself can be very brittle. This is why sometimes a DIY stand will be more durable.

But not all TVs can be fixed this way.

For wall mounting, the screen must meet certain requirements.

  1. It should only be liquid crystal (LCD or LED) and plasma (Plazma). It is not allowed to hang models with a CRT screen, they can only be placed on a shelf.
  2. All connections must be on the front or side panel. Or on the back, if there is a niche in the body with which the cables can be placed.
  3. Necessary the presence of slots or threaded holes on the back of the box.
  4. The passport of the device must indicate the ability to mount on the wall.
  5. You can only install a small TV on your own. The size (and weight) allowed depends on the strength of the supports you make, but typically less than 24 inches diagonally.

If your model meets all of these requirements, you can start choosing a mounting location.

Site selection and preparation

First, determine a comfortable distance between the screen and your eyes. A 32-inch screen should be installed at a distance of 2 meters from the viewer. If the diagonal is 50 inches, the required distance is 3 meters.

Choose a place where you don’t tilt your head while looking, but sit up straight. The center of the screen should be at the viewer’s eye level.

“Be careful when choosing a position. Once the monitor is secured, it cannot be changed.”

When choosing a place of attachment, you must follow important rules.

  • The TV should hang freely and not in a niche between furniture. This is necessary for its normal cooling.
  • In the place of fixing, hidden wiring is not allowed. It will interfere and may cause an accident during installation. Use special devices to search for wiring. In general, the wires from plugs and switches run horizontally and vertically.
  • Between the back of the cabinet and the wall. there should be a cooling space.
  • It is recommended to place the screen near a power outlet. It is better in terms of fire safety and looks aesthetically pleasing.
  • The TV should harmoniously fit into the interior of the room. There may be furniture next to it, but it should not interfere with cooling.

Hanging the screen on a wall without a bracket with your own hands is not possible on every wall. Consider a few features when choosing a support surface.

  • Brick and wood walls work well. You just need them not to fall apart.
  • If the wall is made of wood, make sure there are no cracks or rot.
  • Gypsum board and aerated concrete are not suitable for anchoring as they can sag under load. In this case, you can use your metal guides.
  • Some types of home bindings require free access to the opposite side.
  • Mounting the TV on a hollow wall is not recommended.

If all conditions are met, you can go to work.

Where and at what height is it better to hang the TV on the wall?

First of all, you need to decide on the location and height of the screen on the wall. In the living room, the TV is usually placed in the recreation area, opposite the sofa and armchairs. In this case, the height is determined depending on the design of the furniture. You need to look comfortably, and for this, the central part of the screen should be approximately at the level of the human eye. So, the height of the TV installation on the wall is determined experimentally, but on average it is 100-120 cm.

In the bedroom, the approach is the same, but you’ll mostly be watching while lying down, so the mounting height of the TV is a bit lower, about a meter.

To properly hang the TV on the wall, determine the height

In the kitchen, the approach is completely different. There is rarely time to pay attention to the image and there is not much space. Therefore, the TV in the kitchen is usually hung closer to the ceiling, and the mounts are sometimes chosen from the ceiling type instead of the wall type. This approach has one more advantage: highly installed computers are more secure.

As for the location of the screen relative to the audience, the optimal distance is determined for plasma screens – this is 3-4 diagonals from the TV. With this arrangement, it will be convenient to look (with normal vision). For all other screen types, whatever distance is convenient is selected, but the minimum distances are given in the table. It is better not to place the furniture closer together, it will be completely uncomfortable.

Screen size in inches Screen size in centimeters Minimum distance to the screen
73′ 185cm 3.71m
Sixty-five ‘ 165cm 3.3 meters
57′ 145cm 2.9m
fifty ‘ 127cm 2.54 meters
46′ 117cm 2.34 meters
42′ 107cm 2.13 meters
37′ 81.3cm 1.88 meters

When choosing a location for the TV on the wall, it is worth considering that it must be well ventilated for normal operation. Therefore, installation in a niche is highly undesirable, although this is the latest trend in design – to make a niche out of the drywall and hang a TV in it. In an extreme case, such an installation method is permissible, but the dimensions of the niche should be much larger than the size of the TV so that the air more or less circulates and cools the rear surface. But even in this case, the TV can quickly fail – overheating has a negative effect on performance.

wall mount

If you want to find out how to mount your TV on a wall without a bracket, this is easy. And you don’t need any other fasteners other than screws. With one condition: you are going to install a screen with a diagonal of less than 24 inches. It can be arranged as a photo frame. Simply hanging it on the wall.

The device, in which this type of fastening is available, is equipped with grooves – «ears». The instructions should indicate which screws to use in this case. They may even be included in the package. This should be checked with the seller. See the next section for a list of screws suitable for different materials.

With this setup, you cannot hide the cables behind the monitor. It will be too close to the wall.

Unless the documentation indicates that the monitor can be fixed this way, don’t try it. This can cause problems with the device. And this is interesting!

Montage mural

If you want to know how to mount your TV on a wall without a bracket, it’s easy. And you don’t need any fixings other than screws. On one condition: you are going to install a screen with a diagonal of less than 24 inches. It can be fixed like a picture frame. Just by hanging it on the wall.

The device, in which this type of fastening is available, is equipped with grooves – “ears”. The instructions for this should indicate which screws to use in this case. They can even be included in the package. This should be checked with the seller. See the next section for a list of screws suitable for different materials.

With this configuration, you cannot hide the wires behind the monitor. It will be too close to the wall.

Unless the documentation says the monitor can be repaired this way, do not try. This can cause problems with the device.

Fixing with a bracket

There must be a certain distance between the screen and the wall (unless otherwise specified in the instructions). It should not be screwed against the surface. It needs space for ventilation. We will have to make a mount. However, many monitors have holes that allow mounting without a stand. The following tips apply to all installation methods.

Before hanging the TV on the wall, find out what it is made of. It depends on the parts to be used and the weight of the units that can be attached.

  • Concrete, brick. The best option (if not crumble). They need to screw dowels for concrete with a size of 50 mm or more. The material will withstand even bulky items. But the wall should be thick and not hollow.
  • Tree. Installation is possible if it is of good quality. No large cracks, rot or internal voids. For fastening, wooden dowels with a size of 30 mm or more are used.
  • Drywall. Under heavy loads, it will bend. You can fix the screen not on the sheets themselves, but on the metal guides. Then the design will be more reliable. But installing large TVs is still not worth it. Butterfly dowels are used. When screwed in, they will “open” at the back of the plasterboard and therefore will not fall out.

You can independently assemble the support from the available tools. For example, parts that you left behind after repairing or assembling furniture are suitable. Suitable equipment can also be purchased in specialized stores.

The frame consists of two parts: one is screwed to the wall, the other to the TV. The heavier the monitor, the stronger the stand should be. Designs may vary depending on your needs. You can make a gutter to hide the wires, create some kind of decorative element, add something of your own.

For example, here is a support for a small screen:

  1. Take the furniture rail, the block of wood and the window anchor plates.
  2. Drill holes in the tire and block it. Pre-measure the distance between the future holes so that the parts can be attached to each other.
  3. Screw the “tire” to the bar with self-tapping screws.
  4. Then screw the bar with the “bus” to the wall.
  5. First, mark the location of the holes. Use a building level to keep the frame straight.
  6. Drill holes in the wall and drive anchors into them.
  7. Drill holes in the block.
  8. Screw the block to the wall by driving the screws into the dowels. Use a screwdriver. A regular screwdriver cannot do this.
  9. Use the screws to attach the anchor plates to the back of the TV. They can be cut with a grinder if they don’t match.
  10. Then attach the screen to the bar with the “tire”. This is done with hooks on the anchor plate.

So you can only hang a light TV. This stand will not support heavy loads.

It is not so easy to find out exactly what dimensions the created frame is designed. The maximum weight of the monitor is usually listed on the brackets. But the hand-made unit will have to be checked “in the field”.

How to fix a TV screen to a wall without drilling the wall

They will have asked you a thousand times and often the solutions were not the best: how can I hang a television without having to damage the supporting wall? Or, I have to hang a screen for a presentation or event, but the back wall is temporary and therefore not stable enough to bear the weight.

The solution is this beautiful design product whose name already suggests everything: Stand It.

Stand It is a column with a double steel support, floor / wall. What does it mean? That the base rests on the floor, it is wide and therefore provides a secure footing. The upper part of the column, on the other hand, naturally leans against the wall and is provided with an adhesive part that is fixed to the wall, thus cushioning the weight.

Stand It is perfect in any context: offices, showrooms, but also hotel rooms and temporary exhibitions. Its simple and linear lines adapt to any decor. It is also so thin that it can be covered by a piece of furniture without creating annoying protrusions.

Stand It is versatile also because its surface lends itself to being customized: it can in fact be painted or covered with adhesive films. To be in line with the mood of the surrounding environment.

Last but not least: Stand It is perfect for when you go to rent and do not have the permits to drill into the walls. With this stand, even the latest TV model will find space in any home.

How to hide the wires?

Here’s how to hide the TV wires on the wall:

  • The most obvious option is right behind the monitor. If the socket is nearby, simply place the cables behind the shield. Just make sure they don’t bend or twist anywhere. Only a small piece with a fork will look.
  • You can drill a channel directly into the wall. But it makes sense to do so if you’re still in the process of being repaired.
  • If you have a plasterboard wall, it is better to hide the wires there.
  • decorative techniques. It’s more of a disguise than a camouflage. You can turn the cable into a part of the interior. For example, stick petals and flowers on it to make it look like a stem. Or make it an element of a design composition.
  • Moldings or cable trays. Hollow “tubes” attached to the wall. All the wiring is placed there. They can be invisible or beautiful.

Your TV’s instruction manual usually lists the available installation methods. You can find specific information from the seller or manufacturer. When buying a monitor, ask if it can be hung on a wall without a stand and if it’s worth buying additional parts. If you have never carried out installation work, it is better to turn to professionals.

You May Also Like